Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 27 results ...

Abdulla, H S (2016) An investigation on the causes and remedial measures on the delays in the construction industry in the Kingdom of Bahrain, Unpublished PhD Thesis, School of Engineering and Built Environment, Glasgow Caledonian University.

  • Type: Thesis
  • Keywords: civil engineering; climate; construction method; construction project; construction sector; government; labour; policy; site investigation; civil engineer; consultant; contractor; owner; project manager; roles; case studies; interview; questionnaire surve
  • ISBN/ISSN:
  • URL: https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.726768
  • Abstract:
    One of the most critical problems in construction projects is delay. Projects can be delayed due to a number of reasons including the owner, the contractor, the consultants, acts of God, or a third party. They may occur early or late in the project, in isolation or in combination with other delays. Construction delays are for the most part costly, whilst completing projects on time is beneficial to all project parties. Therefore, it is essential to identify the actual causes of delay. The Kingdom of Bahrain has an active construction sector, but it is one which also suffers from these ubiquitous problems of delay and disruption. This thesis presents the findings of an investigation by 555 questionnaire surveys, nine structured interviews, ten legal court cases, and two case studies, aimed at identifying the most important causes of delays in civil engineering construction projects in the Kingdom of Bahrain. This thesis investigates the major factors causing project delay by demonstrating, illustrating and evaluating the roles of the construction or project manager, contractor, owner and consultants in avoiding project delay. The research has identified nine major causes of delay and seven causes common to all sources of the triangulated data. These triangulated findings demonstrate a comprehensive method of identifying critical factors, which controls for respondent bias. The results show that there is an urgent need to minimise and control the following in the Kingdom of Bahrain: financial difficulties, reluctance to use modem construction methods, shortage of materials, shortage of skilled labourers, slow response and poor inspection from the consultant, inaccurate site investigations and unforeseen ground conditions, and difficulties in obtaining work permits. Based on the analysis and results, a number of recommendations are suggested to reduce construction delays in the Kingdom of Bahrain, including as most critical: the government should create a climate of economic and political stability which can kindle confidence in investors; have a government level policy to reserve quantities of materials in designated areas as well as constitute a research and development cell to develop the use of local building materials; and the government should improve the working environment of labourers.

Alrashed, F A (2015) Design and application of zero-energy homes in Saudi Arabia, Unpublished PhD Thesis, School of Computing, Engineering and Built Environment , Glasgow Caledonian University.

Callaghan, N (2013) Alignment of house buyer and house builder opinions in the delivery of energy efficient homes in Scotland, Unpublished PhD Thesis, School of Computing, Engineering and Built Environment , Glasgow Caledonian University.

Charles, A (2012) Factors affecting the transformation of existing (no-fines concrete) dwellings to low carbon homes, Unpublished PhD Thesis, , Glasgow Caledonian University.

Endut, I R (2008) Framework for minimising time overruns of Malaysian construction projects, Unpublished PhD Thesis, School of the Built and Natural Environment, Glasgow Caledonian University.

English, J (2007) The development of women in the South African construction workforce in terms of employment, training and skills acquisition, Unpublished PhD Thesis, , Glasgow Caledonian University.

Graig, N (2007) The prevailing trends of defects and snagging in new homes in the UK, Unpublished PhD Thesis, , Glasgow Caledonian University.

Hare, W J (2006) Integration of health and safety planning in construction project management through the development of a best practice gateway model, Unpublished PhD Thesis, , Glasgow Caledonian University.

Leblanc, H (2012) Knowledge mapping and process modelling to develop a sustainability-related knowledge management strategy for Scottish housing association planned works, Unpublished PhD Thesis, , Glasgow Caledonian University.

Lee, C C (2007) Developing an appropriate methodology for matching project team's knowledge with client's project requirements in refurbishment projects, Unpublished PhD Thesis, School of Built and Natural Environment, Glasgow Caledonian University.

Lowe, J (1993) Construction productivity: an input-output approach , Unpublished PhD Thesis, , Glasgow Caledonian University.

Magdub, R H (2006) Application of the lump sum turnkey contracts in Libyan civil law with reference to English law and international practice, Unpublished PhD Thesis, School of Law and Social Sciences, Glasgow Caledonian University.

McGibbney, L J (2012) Better regulation of construction activity through data modelling, Unpublished PhD Thesis, , Glasgow Caledonian University.

McNairney, F (2012) Using images to overcome communication hurdles posed by foreign site operatives, Unpublished PhD Thesis, School of Engineering and the Built Environment, Glasgow Caledonian University.

Meldrum, A (2009) Measuring worker engagement as an aspect of health and safety performance in the construction industry: towards a best practice tool, Unpublished PhD Thesis, School of Engineering and the Built Environment, Glasgow Caledonian University.

Morrow, S (2012) Balancing a safer and healthier frame to designing: A grounded theory, Unpublished PhD Thesis, , Glasgow Caledonian University.

Odeyinka, H. A. (2003) The development and validation of models for assessing risk impacts on construction cash flow forecast, Unpublished PhD Thesis, School of the Built and Natural Environment, Glasgow Caledonian University.

Rostami, A (2015) Risk management in small and medium enterprises in the UK construction industry, Unpublished PhD Thesis, School of Engineering and Built Environment, Glasgow Caledonian University.

Rostron, J (2021) Improving access design considerations in buildings and services for people with disabilities, Unpublished PhD Thesis, , Glasgow Caledonian University.

Saka, N (2013) The impact of foreign direct investment on the construction sectors of Africa, Unpublished PhD Thesis, , Glasgow Caledonian University.

Shehu, Z (2008) The framework for effective adoption and implementation of programme management within the UK construction industry, Unpublished PhD Thesis, , Glasgow Caledonian University.

Sulaiman, N F (2002) The development of a dual phase approach to embracing a total quality culture in the Malaysian construction industry, Unpublished PhD Thesis, , Glasgow Caledonian University.

Suresh, S (2006) Knowledge capture in small and medium enterprises in the UK construction industry, Unpublished PhD Thesis, , Glasgow Caledonian University.

Takim, R (2005) A framework for successful construction project performance, Unpublished PhD Thesis, , Glasgow Caledonian University.

Tong, M K L (2011) The management of inter-organisational relationships and project based learning, Unpublished PhD Thesis, School of Engineering and Built Environment, Glasgow Caledonian University.

Trushell, J M (2010) A history of the quantity surveying profession in scotland to the late-twentieth century, with special reference to john dansken & purdie, chartered quantity surveyors, Unpublished PhD Thesis, , Glasgow Caledonian University.

Yfanti, S (2015) An investigation of critical success factors for the creation of clusters within micro companies working in the construction sector, Unpublished PhD Thesis, Department of Business Management, Glasgow Caledonian University.